How to Add Transmission Fluid Jeep Cherokee?

If you are the owner of a Jeep Cherokee, then you know that it is important to keep the transmission fluid in good condition. Neglecting to do so can result in costly repairs down the road. In this article, I’ll provide a step-by-step guide on how to add transmission fluid to your Jeep Cherokee.

So, whether you are a novice or an experienced mechanic, you can follow these instructions and get the job done quickly and easily!

What Transmission Fluid Does Jeep Cherokee Use?

Before we get started, it is important to note what type of transmission fluid your Jeep Cherokee uses. Depending on the year and model of your Jeep Cherokee, you will need to use a specific type of transmission fluid. For example, many newer models require that you use synthetic transmission fluid.

The most common type of transmission fluid used in Jeep Cherokees is Dexron III. This fluid is designed for use in both automatic and manual transmissions. It is important to check your owner’s manual to see what type of transmission fluid is recommended for your specific Jeep Cherokee model. 

If you are unsure about what type of transmission fluid to use, you can always consult with a Jeep dealership or a qualified mechanic. They will be able to help you choose the correct fluid for your Jeep Cherokee and change it for you if needed.

How To Check Transmission Fluid Of Your Jeep Cherokee?

It is important to check your transmission fluid level regularly. This will help you to avoid any potential problems and keep your Jeep Cherokee running smoothly. You can check the transmission fluid level in two ways:

• By using the dipstick method
• By checking the transmission fluid level on the outside of the transmission case

The most accurate way to check the transmission fluid level is by using the dipstick method. To do this, you will need to locate the dipstick on your Jeep Cherokee. The dipstick is usually located near the front of the engine. Once you have found it, pull it out and wipe it clean with a rag. Then, reinsert the dipstick into the transmission and pull it out again.

You will be able to see the fluid level on the dipstick. If the fluid level is at or below the “full” line, then you will need to add more transmission fluid. If the fluid level is above the “full” line, then you do not need to add any fluid.

It is also a good idea to check the transmission fluid level on the outside of the transmission case. This can be done by looking at the dipstick tube. The dipstick tube is usually located near the front of the engine. You will be able to see the fluid level through the dipstick tube. If the fluid level is at or below the “full” line, then you will need to add more transmission fluid.

How to Add Transmission Fluid Jeep Cherokee?

Now that you know how to check the transmission fluid level, it is time to learn how to add transmission fluid. This is a relatively simple process that can be done in a few easy steps.

• First, locate the transmission dipstick and remove it from the engine.
• Next, locate the transmission fill hole. This is usually located on the side of the transmission.
• Then, insert the funnel into the transmission fill hole and pour the new fluid into the funnel.
• Finally, reinsert the dipstick into the engine and check the fluid level again to make sure that it is at the correct level.

That’s all there is to it! By following these simple steps, you can easily add transmission fluid to your Jeep Cherokee. Just remember to check the fluid level regularly and to use the correct type of fluid for your Jeep Cherokee model.

How Much Fluid Does Jeep Cherokee Transmission Take?

The amount of transmission fluid that your Jeep Cherokee needs will depend on the year and model of your vehicle. It is important to check your owner’s manual to see how much fluid your specific Jeep Cherokee model requires.

In general, most Jeep Cherokees will take between 11 and 16 quarts of transmission fluid.

If you are unsure about how much fluid your Jeep Cherokee needs, you can always consult with a Jeep dealership or a qualified mechanic. They will be able to help you choose the correct amount of fluid for your Jeep Cherokee and change it for you if needed.

What Is The Cost Of Changing Jeep Cherokee Transmission Fluid?

The cost of changing your Jeep Cherokee’s transmission fluid will depend on a few factors, such as the year and model of your vehicle, the type of fluid that you use, and the location of the service.

In general, most Jeep Cherokees will need between 11 and 16 quarts of transmission fluid. The cost of the fluid itself will range from $20 to $60.

The labor cost for changing the transmission fluid will usually be between $80 and $120.

Therefore, the total cost of changing your Jeep Cherokee’s transmission fluid will range from $100 to $180.

Keep in mind that the cost of changing your Jeep Cherokee’s transmission fluid will be much less than the cost of repairing or replacing the transmission. Therefore, it is important to change the fluid on a regular basis to prevent costly repairs down the road.

Final Thoughts

Adding transmission fluid to your Jeep Cherokee is a relatively simple process that can be done in a few easy steps. Just remember to check the fluid level regularly and to use the correct type of fluid for your Jeep Cherokee model.

If you are unsure about how much fluid your Jeep Cherokee needs, you can always consult with a Jeep dealership or a qualified mechanic. They will be able to help you choose the correct amount of fluid for your Jeep Cherokee and change it for you if needed.

Hopefully, this article has provided you with the information that you need to add transmission fluid to your Jeep Cherokee. If you have any further questions, please feel free to contact and I’ll be happy to help!