How Much Metal is Too Much in Transmission Fluid?

Metal in transmission fluid is never a good thing. In fact, it can be downright dangerous. How much metal is too much? And how do you know if your transmission fluid has too much metal in it? Keep reading to find out!

What Are Metal Shavings in Transmission Fluid?

If you take a look at your transmission fluid, you may notice some small metal shavings floating around in it. These metal shavings come from the transmission itself and are completely normal. Every time your transmission shifts gears, metal shavings are produced.

Over time, these metal shavings can build up and start to clog your transmission filter. When this happens, your transmission fluid can’t do its job properly and your transmission can start to overheat. That’s why it’s important to check your transmission fluid regularly and change it according to your manufacturer’s recommendations.

What Causes Metal Shavings in Transmission Fluid?

There are a few different things that can cause metal shavings in transmission fluid:

Wear and Tear

Over time, your transmission will start to wear down and produce metal shavings. This is normal, and nothing to be concerned about unless you start to see an excessive amount of metal in your fluid.

Transmission Damage

If your transmission is damaged, it can cause metal shavings to enter the fluid. This is a serious problem and you should take your car to a mechanic as soon as possible if you think this may be the case.

Poor Quality Transmission Fluid

If you don’t use good quality transmission fluid, it can break down and turn into metal shavings. This is why it’s important to use the type of transmission fluid recommended by your car manufacturer.

Not Changing Transmission Fluid Regularly

If you don’t change your transmission fluid regularly, the metal shavings can build up and clog your transmission filter. This can cause your transmission to overheat and fail.

Accelerating The Engine Quickly

If you accelerate the engine too quickly, it can cause metal shavings to enter the transmission fluid. This is why it’s important to drive smoothly and avoid quick acceleration.

How Much Metal is Too Much in Transmission Fluid?

If you’re seeing metal shavings in your transmission fluid, it’s important to take action right away. The amount of metal in your transmission fluid will increase over time, and if it gets too high it can cause your transmission to fail.

How do you know if there’s too much metal in your transmission fluid?

Here are a few signs to look out for:

• Dark, cloudy, or gritty-looking transmission fluid
• Transmission fluid that smells burnt
• Shifting problems
• Transmission overheating
• Leaks in the transmission

If you notice any of these signs, it’s important to take your car to a mechanic as soon as possible. They will be able to check the level of metal in your transmission fluid and, if necessary, replace your transmission.

Don’t let too much metal in your transmission fluid cause your car to break down.

Pictures of Metal Shavings in Transmission Pan

How to Remove Metal Shavings from Transmission Fluid?

If you’re seeing metal shavings in your transmission fluid, there are a few things you can do to remove them. First, check your transmission fluid level and make sure it’s full. If it’s low, add more transmission fluid.

Next, use a magnet to remove any metal shavings from the fluid. You can find magnets at most hardware stores. Just hold the magnet over your transmission fluid and it will attract the metal shavings.

Finally, change your transmission fluid according to your manufacturer’s recommendations. This will help remove any remaining metal shavings and prevent them from building up in your transmission.

If you’re still seeing metal shavings in your transmission fluid after doing all of this, take your car to a mechanic. They will be able to diagnose the problem and make any necessary repairs.

Don’t let metal shavings ruin your transmission. With a little bit of effort, you can remove them and keep your car running smoothly.

How to Prevent Metal Shavings in Transmission Fluid?

The best way to prevent metal shavings in transmission fluid is to change your transmission fluid regularly. This will help remove any metal that’s already in the fluid and prevent new metal from entering.

It’s also important to use good quality transmission fluid. This will help keep your transmission clean and prevent metal shavings from forming.

Finally, be careful when accelerating the engine. If you do it too quickly, it can cause metal shavings to enter the transmission fluid. So, drive smoothly and avoid quick acceleration.

By following these tips, you can keep your transmission running smoothly and prevent metal shavings from ruining it.

Final Words

Metal in transmission fluid is never a good thing. If you see metal shavings in your fluid, it’s important to take action right away. The best way to remove metal shavings from your transmission fluid is to use a magnet. You can also change your transmission fluid regularly to prevent metal shavings from forming.

Be careful when accelerating the engine, as this can cause metal shavings to enter the transmission fluid. By following these tips, you can keep your transmission running smoothly.

Do you have any other tips for preventing or removing metal shavings from transmission fluid? Let us know in the comments below!