How to Check Transmission Fluid on Subaru Forester?

If you own a Forester, then you should know how to check the transmission fluid level. The process is not difficult, but it is important that you do it regularly in order to keep your vehicle running smoothly. In this article, I’ll discuss how to check transmission fluid on Subaru Forester and provide some helpful tips along the way!

How to Check Transmission Fluid on Subaru Forester?

Subaru Foresters have a transmission fluid dipstick located near the front of the engine, on the driver’s side.

To check your transmission fluid, first, find the dipstick and pull it out. Wipe it off with a clean cloth or paper towel, then reinsert it and remove it again. You should see fluid on the end of the dipstick. If the fluid is below the “full” line, then you will need to add more transmission fluid.

How to Check Transmission Fluid on Subaru Forester?

Be sure to use the correct type of fluid for your Forester. You can find this information in your owner’s manual or by contacting a Subaru dealer.

What Type Transmission Fluid Does Subaru Forester Take?

The Subaru Forester comes equipped with a SUBARU Linertrain CVT (Continuously Variable Transmission). The recommended transmission fluid for the Forester is Subaru High Torque CVTF.

Some Subaru Forester models also come with automatic transmission and for those models, you will need to use DEXRON®-VI ATF.

How Much Fluid Does Subaru Forester Transmission Hold?

The Subaru Forester comes with a six-speed manual or automatic transmission. The manual transmission holds 3.7 quarts of fluid while the automatic transmission holds 4.2 quarts.

How To Change Subaru Forester Transmission Fluid?

Subaru Foresters require a transmission fluid change every 30,000 miles or 24 months, whichever comes first. This is an easy process that you can do at home with a few tools and supplies. You will need:

  • Transmission fluid
  • A catch pan
  • A ratchet and socket set
  • An oil funnel

Follow these steps to change your Forester’s transmission fluid:

  • Park your Forester on a level surface and put it in the “park” position.
  • Place the catch pan under the drain plug, which is located at the bottom of the transmission.
  • Using the ratchet and socket set, remove the drain plug and allow all of the fluid to drain out.
  • Clean the area around the drain plug, then replace it and tighten it.
  • Remove the fill plug, which is located on the side of the transmission.
  • Insert the funnel into the fill hole and add new transmission fluid until it reaches the “full” line on the dipstick.
  • Replace the fill plug and tighten it.
  • Start the engine and check for leaks.

How Much It Will Cost to Change Subaru Forester Transmission Fluid?

If you choose to have a professional change your Forester’s transmission fluid, it will cost between $200 and $300. If you do it yourself, the cost will be around $100, depending on the price of transmission fluid and other supplies.

Final Words

It is important to check and change your Forester’s transmission fluid on a regular basis. By doing so, you will keep your vehicle running smoothly and prolong the life of your transmission. With a few simple tools and supplies, you can easily do it yourself!

Checking Transmission Fluid on Subaru Forester

Add a Comment

Your email address will not be published. Required fields are marked *